Sponsored By

Conamix CEO: ‘A Change in Battery Materials is Needed’ for Affordable EVs

Charlotte Hamilton, CEO of battery maker Conamix, talks about the potential of sulfur-based lithium batteries, the Inflation Reduction Act, and more.

Maria Guerra, Senior Editor-Battery Technology

January 9, 2023

4 Min Read
Charlotte Hamilton.jpg
Charlotte Hamilton, CEO of Conamix.Courtesy of Conamix

Conamix is a venture-backed battery materials company working to create sulfur-based lithium batteries for electric vehicles. Charlotte Hamilton, CEO and co-founder of Conamix talked to Battery Technology and shared her thoughts about different subjects related to sulfur-base batteries.

Sulphur-based batteries for EVs

Lithium-sulfur (Li-S) batteries have the advantage of storing more energy density than lithium-ion batteries. Also, the sulfur-based cathode can produce batteries that could be lighter and cheaper than lithium-ion batteries.  Sulfur cathode material is cheaper and a more environmentally friendly than other metal oxides of the cathode such as nickel, manganese, and cobalt.

The lighter weight of Li-S batteries makes them attractive for electric aircraft application, especially for unmanned aerial vehicles (UAVs) or drones. Even though Li-S batteries still have limitations ̶ limited recharging cycles ̶ the technology has the potential to transform the electric vehicle (EV) market.

In fact, Conamix is working on automotive batteries with sulfur cathode technology. “The best use case for sulfur-based batteries is EVs” said Hamilton. “I don’t think that anyone has been able to hit automotive-level performance previously with lithium-sulfur but at this point our sulfur-based cathode technology is performing well and we are working on integrating our cathode technology against other anode technology.”

Related:Fifty Years Later: The Improbable Birth of the Lithium-Ion Battery

According to Hamilton, Conamix can reduce costs by over 50% at the bill materials level versus other high energy materials. “We make very good lithium-sulfur batteries, but they are not yet good enough to be automotive batteries.  But the potential for automotive is amazing because it is a path for affordable electric vehicles (EVs). We have lower costs than LFP [lithium iron phosphate] batteries and much lower costs than NMC [nickel-manganese-cobalt] or NCA [nickel-cobalt-aluminum] batteries. But we are not ready yet for automotive. If we can hit the right energy density and cycle-life targets for EVs, we can have a path to an affordable technology,” she said.

Standing out from the competition

Conamix started with core technology from three different major universities—Berkeley University, Cornell University, and Stanford University. Therefore, the company is primarily based on materials and science innovation.

“We also have additives that replace other parts of a traditional lithium-sulfur cathode that allow us to achieve volumetric and gravimetric levels. Getting energy density requires a very low electrolyte ratio and more than just sulfur itself,” Hamilton said.

Related:Turning Paper Waste Into Battery Components

conamix.jpg

Supply chain challenges and the Inflation Reduction Act (IRA)

According to Hamilton, with Conamix’ technology there is potential to make a high-energy battery with using only an America-based supply chain. “The additives that we use are also common materials. We are not using any cobalt, we are not using nickel at all. We are using very common materials that are easy to manufacture. That appeals to the American auto makers because they are looking for a domestic, low-cost solution,” she continued.

Hamilton has an interesting point of view about the IRA. She said that IRA incentives help in a way, but that existing technologies are not there yet to enable 100% EV adoption. “If you don’t have a technology that is reasonable priced, and that allows profitability to auto makers; it doesn’t really matter how much money you throw at the problem,” she said. “We need material science innovation before trying to make a real change.”

She continued, “At Conamix we are excited about the IRA because it gives further incentives to auto makers to sort materials in the US. It is a win for Conamix but ultimately, I think, governments should be investing in truly transformative material technologies that allow a change in the pricing of materials for EVs. Just subsidizing things further doesn’t really accomplish the overall goal of getting a new system of profitability for the auto makers and lower car prices.”

The future of Conamix and EVs

In 2023 Conamix will be reaching key milestones such as getting third-party test results and integrating their high-performance cathode into a complete system that will enable a high-performance, low-cost battery, Hamilton said.

“The auto industry is realizing that a change in battery materials is needed to reach affordable EVs. Five years ago, auto makers were hoping that existing chemistry would reduce in price. But with not-abundant materials such as nickel, prices are not going to come down” she noted. “In fact, prices are going to go up. Prices of lithium-ion batteries are increasing their value and I think that will continue to happen. To meet the goal of 100% EV’s by 2035, auto makers are going to need new materials in place to support global change in EV numbers.”

About the Author(s)

Maria Guerra

Senior Editor-Battery Technology, Informa Markets Engineering

Battery Technology Senior Editor Maria L. Guerra is an electrical engineer with a background in Oil & Gas consulting and experience as a Power/Analog Editor for Electronic Design.  Maria graduated from NYU Tandon School of Engineering with a Master of Science in Electrical Engineering (MSEE). She combines her technical expertise with her knack for writing. 

Sign up for the Weekly Current newsletter.

You May Also Like